How to Install EPDM to a Shed Roof? 7 steps

Install EPDM to a Shed Roof! This can be a great way to create a durable and long-lasting roofing surface. EPDM is a synthetic rubber roofing membrane that is highly resistant to weathering, UV rays, and temperature extremes. Here are some steps to guide you on how to install EPDM on your shed roof:

7 Steps in How to Install EPDM to a Shed Roof

Measure the roof – Before you start, you need to measure the dimensions of your shed roof to determine the amount of EPDM membrane you will need.

Clean the roof surface – It is important to clean the roof surface thoroughly before installing the EPDM membrane. Remove any debris or loose material and ensure the roof is dry and free of any dirt or dust.

Apply adhesive – Apply a layer of EPDM adhesive to the roof surface, using a brush or roller. Work in sections and ensure the adhesive is evenly spread.

Install the EPDM membrane – Roll out the EPDM membrane over the adhesive, ensuring it is centered and aligned with the edges of the roof. Smooth out any wrinkles or air bubbles using a roller.

Trim the edges – Once the membrane is in place, trim the edges to fit the roof using a sharp utility knife.

Seal the edges – Apply EPDM seam tape along the edges of the membrane to seal it to the roof. Apply pressure using a roller to ensure a tight seal.

Finish the roof – Once the membrane is installed, you can add finishing touches such as drip edges or guttering to protect the edges of the roof.

Are you ready to go?

Overall, installing EPDM in your shed roof can be a great investment in the long-term durability and lifespan of your shed. However, it is important to follow proper installation techniques and consult with a professional if you are unsure about any aspect of the process.